Multimode optical fiber demultiplexer-star coupler using a single gradient-index-rod lens and a multi-facet grating

An optical fiber multi-function device consisting of a single gradient-index-rod lens and a multi-facet blazed reflection grating is proposed to simultaneously realize functions of wavelength demultiplexing and optical signal distribution in a multimode optical fiber transmission system. We analyzed the demultiplexing characteristics and the tolerance of optical components using the ray trace method. This device can realize not only low loss optical signal distribution but also offers improved demultiplexing characteristics in comparison with the previously proposed demultiplexer-multiposition switch. The following characteristics are expected from the design using commercially available optical components: a working band of 0.64–0.88 μm, channel separation of 34–36 nm, 3 dB bandwidth of 27–28 nm, channel cross-talk of less than - 40 dB and minimum excess insertion loss of 0.9–2.1 dB.     

Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

具连续分布滞量的非线性中立型抛物偏泛函微分方程的振动性

考虑一类具连续分布滞量的非线性中立型抛物偏泛函微分方程解的振动性,借助Green定理和时滞微分不等式获得了这类方程在Robin,Dirichlet边值条件下所有解振动的若干充分条件.     

随机环境中双移民生灭过程的极限性质

引入了随机环境中双移民生灭过程的概念，定义了过程的模态指示函数，在此基础上研究了其转移矩阵的平稳分布，给出了平稳分布众数的位置与模态指示函数之间的关系．研究了平稳分布的众数与边界关系．     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

基于重复测量数据的Poisson回归模型的偏大离差的Score检验

Poisson回归模型广泛应用于分析计数型数据 ,Dean&Lawless(1989)和Dean(1992 )讨论了非重复测量得到的计数型数据的偏大离差存在性的检验问题 .本文分别利用随机系数模型和对数非线性模型讨论了基于重复测量得到的计数型数据的偏大离差的检验问题 ,得到了检验的score统计量 .     

One-dimensional non-nearest-neighbor random walks in the presence of traps

A one-dimensional lattice random walk in the presence ofm equally spaced traps is considered. The step length distribution is a symmetric exponential. An explicit analytic expression is obtained for the probability that the random walk will be trapped at thejth trapping site.     

医疗保险索赔数据的广义Pareto分布拟合

How to choose an optimal threshold is a key problemin the generalized Pareto distribution (GPD) model.This paper attains the exactthreshold by testing for GPD,and shows that GPD model allows the actuary to easily estimate high quantiles and the probable maximum loss from the medical insurance claims data.     

两指标双F统计过程控制图

当产品质量指标服从二元正态分时,可用T2控制图与Λ控制图联合判断产品生产的过程是否处于受控状态。本文利用T2统计量与F统计量、Λ统计量与F统计量之间的关系,得到了两指标情形下两类基于F分布统计量的统计过程控制图,简称双F统计过程控制图,并给出了控制图应用实例。